How to Maintain the Sliding Bearing Accurately
The Slide Bearing helps with the linear motion and supports the structural expansion. It is mostly used for construction and precision tooling purposes. The bearing’s assembly consists of a PTFE sliding surface, structural pads, and the slide bearing plates. The slide bearing is used to reduce the friction between the reciprocating, rotating, and sliding surfaces.
This bearing type differs from the roller and ball bearings as it helps reduce friction if using these forms of bearings. Slide bearings are mostly used in the communication, critical manufacturing, government facilities industries, and much more. So, it is necessary to maintain them too. It will help them to work for a longer time. Let us now see how we can keep the sliding bearing.
Keep a Check On the Housing and Shaft
Before mounting the bearing, it is necessary to check the shaft and housing totally for any damage or any bad physical condition. If you see any dust, burrs, or nicks on the housing or the shaft, clean it with the help of a soft cloth.
Good to Avoid Pre-Heating or Over-Heating
The sliding bearing’s heating must be done according to the heating that has been stated for these bearings. If you overheat the bearings above their permitted limit, it can soften or deform its steel material. The pre-heating or over-heating can also lead to a failure and lowering the load-carrying capacity. The bearings must be heated with the help of the induction heaters and not the open flames.
Bearings Must be Mounted Correctly
The method used for mounting the bearings depends on the type of sliding bearing you are using. If you are using the slide bearings with the cylindrical bores, they must be fitted with the help of the ‘press-fit method. On the other hand, if the bearings have tapered bores, they can be mounted directly on the cylindrical or tapered shafts. The pressure must be applied with the help of the press-fit method because the raceways can become damaged without them.
The sliding bearings are used for multiple tasks in various industries, but their maintenance is equally important. If you are based in Houston, then get the Slide Bearing Houston manufactured by GRM Custom Products. They provide cost-effective and high-quality slide bearings for the manufacturing and construction industries in and around the region. The Company offers customized products too.
Our Location: Slide Bearings ;11133 I-45 S.,Suite Q, Conroe, TX 77302, United States
Slide Bearings Houston
